Skip to main content

Release Version

Major VersionM

by Modbar Support

Introduction

Make sure your AV Module is turned off, unplugged from power and then remove the 8 phillips head screws from the top panel to expose the boiler ball valves.

Tools

Parts

No parts specified.

  1. Boiler valve setting for single tap installation
    • Boiler valve setting for single tap installation

  2. Boiler valve setting for two tap installation
    • Boiler valve setting for two tap installation

  3. Remember to program your AV Module for two boilers to complete your two tap setup.
    • Remember to program your AV Module for two boilers to complete your two tap setup.

    • Note: The default factory setting is for a single boiler and single tap.

Finish Line

Modbar Support

Member since: 07/22/2014

58 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 23

All Time: 66