Skip to main content

prereq front panel v2

Minor Versionm

by randy@lamarzocco.com

  1. take module out of service remove joy pad by pulling it away from the module remove encoder knob by pulling it away from the module
    • take module out of service

    • remove joy pad by pulling it away from the module

    • remove encoder knob by pulling it away from the module

    • remove the screws securing the USB interface to the front of the module

  2. loosen the 2 securing screws holding the terminal block to the back of the front panel
    • loosen the 2 securing screws holding the terminal block to the back of the front panel

  3. hold the terminal block in place while turning the power switch back and forth slowly pull on the switch while you turn if the switch doesn't disengage, loosen the terminal block mounting screws more and repeat step
    • hold the terminal block in place while turning the power switch back and forth slowly

    • pull on the switch while you turn

    • if the switch doesn't disengage, loosen the terminal block mounting screws more and repeat step

  4. fold terminal block out of the way for service be careful of your connections remove the 6 screws holding the front panel in place
    • fold terminal block out of the way for service

    • be careful of your connections

    • remove the 6 screws holding the front panel in place

    • remove the front panel for service

randy@lamarzocco.com

Member since: 07/12/2018

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 18